Manual Better - Digi Sm-300 Scale User

When changing between label types or paper sizes, the optical gap sensor must be recalibrated to detect backing paper boundaries:

: Use the feed key to recalibrate the label sensor.

Enter the unit price via the numerical keypad and press the confirmation key. digi sm-300 scale user manual

Confirms the scale is currently in standard sales and transaction mode.

Note: Calibration typically requires a physical "Span Switch" to be toggled, often located under the scale body. Turn on the scale and press the . Enter Z Mode ( [M] , [RE-ZERO] , [M] , [M] ). Hold [RE-ZERO] and type 8715 to enter CALIBRATION MODE . When changing between label types or paper sizes,

: While holding [RE-ZERO] , type 141 (for user settings) or 142 (for system/weight settings). Common Adjustments : SPEC 0 : Set label or receipt mode.

Designed with both the keyboard and displays raised away from the platter. Hold [RE-ZERO] and type 8715 to enter CALIBRATION MODE

: Place the item on the platter, enter the PLU code, and press the [PRINT/*] key (or [TOTAL PRINT] ).

A: Yes, use the "dwt" (pennyweight) or "ct" (carat) mode. Ensure you calibrate weekly for high-value metals.