Guang Long Qd1.5-2 [better] | TRUSTED ⟶ |

No. Impossible. The main breaker to this section had been thrown months ago.

Built-in thermal overload protection prevents the motor from burning out if the pump runs dry or operates outside its designed parameters. This safety feature significantly extends the pump's lifespan.

| Specification | Value | |---------------|------------------------| | Power Output | 1.5 HP (approx. 1100W) | | Voltage | 110V / 220V (50/60Hz) | | Max Flow Rate | 25 – 30 m³/h (depending on head) | | Max Head (Lift) | 18 – 22 meters | | Max Submersion Depth | 7 – 10 meters | | Max Water Temperature | 35°C (95°F) | | Discharge Outlet Diameter | 2 inches (50mm) or 1.5 inches (40mm) with adapter | | Protection Rating | IP68 | | Insulation Class | E or B | | Impeller Material | High-strength engineering plastic or cast iron (varies by manufacturing batch) | | Motor Material | Copper wire (high-purity) | guang long qd1.5-2

2 spark ports (capable of igniting up to two separate burners).

Widely used in the Napoleon P450 series, 308RBPT, 750RSBI, and several Prestige and Mirage models. Built-in thermal overload protection prevents the motor from

Unlike many small pumps that prioritize flow over pressure, the two-stage design of the QD1.5-2 provides an impressive maximum head of up to 22 meters. This makes it suitable for applications where water needs to be pushed uphill or lifted from deep sumps.

is identified as a modern, high-precision industrial device designed to meet the demands of various manufacturing and research sectors. 1100W) | | Voltage | 110V / 220V

Connect a 2-inch discharge hose to the pump, and you can draw water from a rain barrel, shallow well, or nearby stream to irrigate a medium-sized garden. The 22m head allows sprinkler systems to function effectively.

| Problem | Possible Cause | Solution | |---------|----------------|----------| | Pump runs but no water | Air lock or clogged impeller | Unplug, tilt the pump while submerged, or clean the impeller | | Low flow rate | Blocked strainer or worn impeller | Clean strainer; replace impeller if damaged | | Pump won’t start | No power, thermal overload tripped | Check outlet, cord, and let pump cool for 30 minutes | | Excessive noise | Cavitation or debris in impeller | Raise water level above pump; clean impeller | | Frequent tripping of breaker | Short circuit or motor failure | Check cord for damage; consult an electrician |

Unlike generic igniters, the QD1.5-2 is a certified component (CSA 1397022). Using a certified module ensures that the spark intensity and pulse frequency are sufficient to ignite the gas safely, preventing dangerous gas buildup. It is widely available through specialized vendors like Grill Parts For Less.