The manual will list the rated current in Amperes. For the IC 2000 P series, this can range typically from 16A up to 125A or higher depending on the specific frame. It is critical to match the rated current to the load calculation of the circuit it protects.
The is a high-performance impulse relay (also known as a latching relay or bistable relay) from Schneider Electric’s Merlin Gerin brand. It belongs to the Multi 9 range, which is widely used for lighting control, HVAC, and industrial automation.
If you cannot locate the original manual, Schneider Electric’s covers most Ic 2000 variants. It is a generic but still authoritative document. Merlin Gerin Multi 9 Ic 2000 P Manual
This is arguably the most critical specification found in the manual. It defines the maximum short-circuit current the breaker can interrupt without being destroyed.
MERLIN GERIN. Page 1. 2. 1. SCHNEIDER ELECTRIC. MERLIN GERIN. réf.: 15286. f. IC 2000P. 2 352000. 35. lux. OFF. 1 2 3 4 5 6 7 1-7. docs.rs-online.com MERLIN GERIN - RS Online The manual will list the rated current in Amperes
A: Not recommended. Different brands have different trip curves and terminal ratings. Always replace with a Merlin Gerin (or Schneider Electric) Multi 9 series for panel compatibility.
While the Ic 2000 P is now discontinued, many installations worldwide still rely on it. By securing an original manual (or an authoritative Schneider Electric replacement document), you protect lives, equipment, and regulatory compliance. The is a high-performance impulse relay (also known
The is a reliable, low-power impulse relay ideal for lighting and remote switching applications. Its latching design reduces energy consumption and heat, while manual override and modular Multi 9 accessories make it flexible for residential, commercial, and light industrial installations.
| Parameter | Value | |-----------|-------| | | 16 A or 20 A (depending on variant – check label) | | Number of poles | 1P, 2P, or 3P (IC2000 P often 1P + neutral or 2P) | | Coil voltage | 12, 24, 48, 110, 230 V AC/DC (P variant likely 230 V AC) | | Impulse duration | Min. 50 ms, max. continuous possible (but not needed) | | Contact type | NO/NC (single changeover or double-throw) | | Rated insulation voltage (Ui) | 250 V / 400 V | | Rated impulse withstand voltage (Uimp) | 4 kV | | Mechanical life | > 1 million operations | | Electrical life | > 100,000 operations at rated load | | Mounting | DIN rail (EN 60715) | | Width | 1 module = 17.5 mm per pole | | Ambient temperature | -20°C to +50°C operating | | Standards | IEC/EN 60669-2-2, IEC 61095 |