Now that we've covered the key features and contents of the manual, let's take a closer look at how to operate the Bostitch H2B stapler.
Leave a comment on this article (if on a blog) or contact Bostitch support at 1-800-556-6696 (US) with your model number ready. bostitch h2b stapler manual
Periodically clear dust and debris from the staple track to prevent feeding issues. Now that we've covered the key features and
If a jam occurs, remove the pusher rod and shake the tool or use pliers to pull the stuck staple from the discharge head. Never use your fingers near the staple exit point. If a jam occurs, remove the pusher rod
Take a full stick of Bostitch H2B staples (or compatible heavy-duty staples – check that they are 21 gauge, 1/4-inch leg). Place the staple strip into the channel of the magazine. The crown (top) of the staples should face up , and the legs should point down into the channel. Push the strip all the way forward until it stops.
Never overload the magazine. Use only genuine Bostitch H2B staples for best performance. Off-brand staples may have wire thickness variations that cause jams.
: Periodically spray a light lubricant (like WD-40) into the staple channel and moving parts to prevent rust and ensure smooth "slapping" action.