Cisco 4948-10ge Configuration Guide -

vlan 999 name MGMT ! interface vlan 999 ip address 10.10.10.2 255.255.255.0 no shutdown ! ip default-gateway 10.10.10.1 ! interface GigabitEthernet1/0/1 switchport access vlan 999 spanning-tree portfast

DataCenter-SW1(config)# vlan 20 DataCenter-SW1(config-vlan)# name Users DataCenter-SW1(config-vlan)# exit

The switch uses a management VLAN (typically VLAN 1 or a dedicated mgmt VLAN). Create a management SVI: cisco 4948-10ge configuration guide

Switch> enable Switch# configure terminal Switch(config)# hostname DataCenter-SW1 DataCenter-SW1(config)# ip domain-name cisco.local

configure terminal hostname DC-SW-4948-01 enable secret MySecretP@ssw0rd service password-encryption clock timezone EST -5 clock summer-time EDT recurring vlan 999 name MGMT

This comprehensive will walk you through the entire process: from initial out-of-the-box setup to advanced Layer 3 routing and security hardening.

This guide was last tested on IOS 12.2(58)SE1. Always verify commands with ? in your specific environment. Always verify commands with

store-and-forward (Global config mode)