Xta-7000 | Temperature Controller Manual 2021

Choose between High-precision PID (Proportional-Integral-Derivative) or standard ON/OFF logic.

Use 3-wire connection to terminals 4, 5, 6.

Pro tip from manual: For setpoint ramp/soak profiles, see advanced parameters SPRG (ramp rate) and SOAK . xta-7000 temperature controller manual

Moves between digits for faster adjustment. Up/Down Arrows: Used to increase or decrease values. 3. Programming the Set Value (SV) To change the target temperature for basic operation: How to programm XMTG-7000 temperature controller

| Code | Parameter | Range / Options | Default | |--------|--------------------|-------------------------------|---------| | InP | Input type | K , J , Pt , 0-20mA etc | K | | unit | Display unit | °C , °F | °C | | P | Proportional band | 0–999°C (0 = ON/OFF) | 30 | | I | Integral time | 0–3600 sec | 240 | | d | Derivative time | 0–999 sec | 60 | | tunE | Auto-tune | 0 = off, 1 = on | 0 | | AL1 | Alarm 1 value | -1999 to +9999 | 50 | | AL2 | Alarm 2 value | -1999 to +9999 | 10 | | HyS | Alarm hysteresis | 1–100°C | 2 | | Addr | Modbus address | 1–247 | 1 | | bAud | Baud rate | 2400–115200 | 9600 | | LOCK | Parameter lock | 0 =unlock, 1 =lock setpoint | 0 | Moves between digits for faster adjustment

Set CTL = MAN . Then use to directly adjust output power (0-100% on display). Useful for testing heaters/valves without closed-loop control.

The XTA-7000 has three parameter levels: Programming the Set Value (SV) To change the

Press the or Down keys to increase or decrease the target value in the bottom SV window. Entering Parameter Mode :

The controller is operated via four front-panel keys: , Shift/Left , Down , and Up . Setting the Temperature (SV) :