Once aligned, press the "Auto-Config" button. The detector will:
Mastering Large-Scale Fire Safety: The Ultimate Fireray 2000 Installation Guide
The Fireray 2000 installation manual is a comprehensive guide that outlines the steps required to install, configure, and test the device. The manual is divided into several sections, each providing detailed information on specific aspects of the installation process. fireray 2000 installation manual
Before commencing the installation, it is essential to review the pre-installation requirements outlined in the Fireray 2000 installation manual. These requirements include:
Before diving into the installation manual, it is crucial to understand what makes this system unique. Unlike conventional detectors that sample air at a single point, the Fireray 2000 projects an infrared beam across a protected area to a reflector. When smoke rises into the beam’s path, it attenuates the signal, triggering an alarm. Its "auto-configuring" feature and built-in laser alignment tool set it apart from older beam detectors. Once aligned, press the "Auto-Config" button
This is where the Fireray 2000 shines. The dedicates an entire section (Section 6: "Initial Setup") to a two-stage process.
After installation, you cannot simply walk away. The manual mandates three tests: Before commencing the installation, it is essential to
The reflector is passive but critical. The manual requires:
Even with the in hand, technicians fall into these traps: