Sometimes, Windows 10 is smarter than it lets on. Before forcing driver signatures, try the standard compatibility mode.

If this works, congratulations! You can skip to the Software Configuration section. However, for most Windows 10 users, you will receive an error stating "Windows found driver software for your device but encountered an error while attempting to install it." This is the signature enforcement block. Proceed to Method 2.

: The setting will take effect after a reboot, allowing you to install the driver manually via Device Manager.

Let me know which part you'd like to dive into.

The DSO-2090 is a 100 MHz, 1-channel USB oscilloscope by Hantek (or similar OEMs), typically using the chipset. Windows 10 does not natively support it; you either need:

The phrase is one of the most searched terms regarding this device, and for good reason. The DSO-2090 was designed in an era when Windows XP and Windows 7 were dominant. The drivers provided by the original manufacturer (Vellman or generic OEM sources) were often unsigned or relied on older architectures that Windows 10’s strict security protocols reject by default.

(for a polished driver)

Right-click the Start button → . Look under:

Because the original drivers may not be digitally signed for modern Windows versions, you might need to disable to complete the installation.

This is the most straightforward method for Windows 10 users, especially those on 64-bit systems.