Intel G41 Express (Eaglelake-G) + ICH7 North/Southbridge combination.
LGA 775, supporting Intel Core 2 Quad, Core 2 Duo, Pentium, and Celeron processors.
Even when the PC is "off," the board receives +5VSB from the power supply. The schematic shows:
The H-IG41-UATX Rev 1.1 schematic is a complex document that reveals the intricate connections between various components on the motherboard. The schematic is divided into several sections, each representing a specific area of the board:
This is the most complex part of the schematic. The Rev 1.1 board uses a 3-phase or 4-phase PWM controller (commonly an ISL6312 or RT8802A). The schematic reveals:
The VID0 - VID6 lines connect from the CPU socket directly to the PWM controller. If these lines are open or shorted, the CPU will not receive its correct core voltage.
Never assume a component is good because it looks fine. The schematic provides net names (e.g., +12V_CPU , PWR_GOOD , H_RESET# ). Always verify continuity on these nets.
By combining these resources with the H-IG41-UATX Rev 1.1 schematic, users can gain a deeper understanding of the motherboard and unlock its full potential.
If you have obtained a PDF copy of the schematic (search for h-ig41-uatx rev 1.1 circuit diagram ), here is how to navigate it: