Becsys5 Installation And Technical Manual !!link!!

: To enter the programming or calibration menus, you may need to enter a pre-set access code. Press and hold the CAL or SETPOINT keys for three seconds to prompt the login screen.

: Familiarize yourself with the Becsys5 installation and technical manual. It is also recommended that at least one person on the installation team undergoes specific training provided by the manufacturer, if available. becsys5 installation and technical manual

: Install the proprietary pH and ORP sensors into the flow cell. Note that chlorine sensors require a one-hour polarization period after installation before they can be calibrated against a DPD test kit. 3. Technical Specifications Range / Resolution pH 0 to 14 pH (0.01 or 0.1 units) ORP -1000 to +1000 mV (1 mV resolution) Temperature 32°F to 150°F (0°C to 66°C) PPM (Optional) 0 to 20 ppm (Free/Total Chlorine) Flow Rate 0 to 8,800 gpm 4. Programming and Calibration : To enter the programming or calibration menus,