Motorola Cp140 Programming Software [better] (2026 Update)

Before you even look for the software, you must understand the hardware chain. The CP140 uses a proprietary Motorola connector. You cannot use a standard USB-to-serial cable. You need:

are defined as "personalities." The software allows you to define specific frequency and privacy code settings for each.

: The software reads the radio's current configuration, called a "code plug," which can then be edited and saved to a PC as a CPG file. motorola cp140 programming software

: Users can open two code plugs simultaneously and use "drag and drop" functionality to transfer settings between them.

The official software for the CP140 is called , specifically versions R06.12.05 or R06.12.07 . Note that "CPS" is different from "RSS" (Radio Service Software). The CP140 uses CPS, which has a modern (for 2008) Windows graphical interface. Before you even look for the software, you

: It provides access to microphone gain, LED alerts, squelch levels, and power output (shifting between high and low power). Technical Requirements

portable radio. While newer MOTOTRBO CPS versions handle digital lines, the CP140 relies on the classic Windows-based Commercial Series software for configuring its analog features. Personality Management : Channels on the Go to product viewer dialog for this item. You need: are defined as "personalities

Stay safe and happy programming.

Here are some tips and tricks to help you get the most out of the Motorola CP140 programming software:

Find an old laptop with a native COM port (RS-232) running Windows XP Professional SP3. This is what Motorola intended. Installation takes five minutes.