On the bottom of the laptop, you will see a large rectangular panel (sometimes latched, sometimes
Locate the "L-shaped" or rectangular access panel on the bottom.
Slide the latches on the bottom of the dv6. The battery sits flush against the hinge. Pull it out. You cannot skip this. hp pavilion dv6 hard drive replacement
The new drive is bare. You need to move the bracket from the old drive to the new one.
Before you spend money, let’s confirm the drive is the culprit. Symptoms of a failing/failed drive in a dv6 include: On the bottom of the laptop, you will
The dv6 uses a standard (height: 9.5mm or 7mm – both fit). You have three main options:
If you turn the laptop on now, you will see "Boot Device Not Found." This is normal—the drive is empty. Pull it out
: Serial ATA (SATA). While the series often uses SATA II (3 Gbps), modern SATA III SSDs are fully backward compatible. Physical Thickness : Supports drives up to 9.5mm thick. Tools Needed : A small Phillips #0 or #1 screwdriver. Replacement Procedure