Epson Adjustment Program L395 Jun 2026

Once the waste counter reaches 100%, the printer refuses to print, scan, or even move its print head. The only immediate solution is using the adjustment program.

The is a lifesaver for budget-conscious users and DIY enthusiasts. It turns a “dead” printer back into a fully functional machine with just a few clicks. However, respect the tool: always backup your EEPROM, manage physical waste ink, and download from trusted sources only.

Users typically search for the for one of the following reasons: epson adjustment program l395

Resetting the counter tells the printer that the waste ink pad is brand new. If your printer is old or has gone through many cleaning cycles, the pad may actually be full of ink. If you reset the counter without checking the pad, ink will eventually overflow, leaking onto your table or floor and potentially damaging the printer’s circuit boards. Always inspect the physical condition of the ink pad before resetting.

Disclaimer: This article is for educational purposes only. Modifying your printer may void the warranty and could cause physical damage or injury. The author assumes no liability for any damage resulting from the use of the Epson Adjustment Program. Once the waste counter reaches 100%, the printer

A: Downgrade firmware (rarely possible) or use a “Firmware Reset Tool” – advanced and risky.

is one of the most popular all-in-one ink tank printers in the market, renowned for its low-cost printing and high efficiency. However, like all inkjet printers, it comes with a silent enemy: Waste Ink Pad Counters . When this counter fills up, the printer halts all operations, flashing an error message that often reads: “Service required. Parts inside your printer are at the end of their service life.” It turns a “dead” printer back into a

Many advanced users install an external waste ink bottle to prevent the internal pad from physically overflowing. However, the digital counter continues to rise. The adjustment program is necessary to match the physical modification.

It is a driver or a regular maintenance tool. It bypasses the printer's internal protection that triggers after a certain volume of ink has been flushed into the sponge pads inside the machine.

Click (not “Clear”, which erases EEPROM). A warning box will appear: “Are you sure you want to initialize the waste ink counter?” Click OK .