This write-up focuses on critical installation parameters derived from the official manual, covering mechanical mounting, alignment, electrical termination, and certification compliance.
The is a next-generation, addressable, reflective beam smoke detector designed specifically for use in Zone 1, Zone 2, and Zone 22 hazardous areas (Gas and Dust). Certified to ATEX, IECEx, and UL standards, it eliminates the need for a separate reflector alignment unit by integrating a class 1 laser into the receiver. This manual provides a step-by-step guide to safely install, align, and commission the device. fireray 3000 exd installation manual
Run the "Find" command in the menu so the controller can identify connected receivers. Laser Alignment: This manual provides a step-by-step guide to safely
The Fireray 3000 EXD is a highly sensitive, infrared beam detector that uses advanced technology to detect fires in their early stages. The device consists of a transmitter and receiver unit, which are designed to be installed in a way that allows them to communicate with each other through a beam of infrared light. When a fire is detected, the device sends an alarm signal to the fire alarm panel, allowing for prompt action to be taken. The device consists of a transmitter and receiver
The Fireray 3000 EXD is backed by a comprehensive warranty and dedicated support team. For more information, please contact the manufacturer or visit their website.
| Parameter | Setting via DIP switches (internal) | |-----------|--------------------------------------| | Sensitivity | Select from: 25%, 30%, 40%, 50% obscuration | | Response time | 5 sec, 10 sec, 20 sec, 30 sec (slower = fewer nuisance alarms) | | Reflector type | Standard (0.1° divergence) or Long Range (0.05°) |
This write-up focuses on critical installation parameters derived from the official manual, covering mechanical mounting, alignment, electrical termination, and certification compliance.
The is a next-generation, addressable, reflective beam smoke detector designed specifically for use in Zone 1, Zone 2, and Zone 22 hazardous areas (Gas and Dust). Certified to ATEX, IECEx, and UL standards, it eliminates the need for a separate reflector alignment unit by integrating a class 1 laser into the receiver. This manual provides a step-by-step guide to safely install, align, and commission the device.
Run the "Find" command in the menu so the controller can identify connected receivers. Laser Alignment:
The Fireray 3000 EXD is a highly sensitive, infrared beam detector that uses advanced technology to detect fires in their early stages. The device consists of a transmitter and receiver unit, which are designed to be installed in a way that allows them to communicate with each other through a beam of infrared light. When a fire is detected, the device sends an alarm signal to the fire alarm panel, allowing for prompt action to be taken.
The Fireray 3000 EXD is backed by a comprehensive warranty and dedicated support team. For more information, please contact the manufacturer or visit their website.
| Parameter | Setting via DIP switches (internal) | |-----------|--------------------------------------| | Sensitivity | Select from: 25%, 30%, 40%, 50% obscuration | | Response time | 5 sec, 10 sec, 20 sec, 30 sec (slower = fewer nuisance alarms) | | Reflector type | Standard (0.1° divergence) or Long Range (0.05°) |
ԳրքաՄոլ
կայքի ստեղծումը և սպասարկումը՝ MAXARTS