Biesse - B Solid Full Cracked Free

A Biesse B Solid must sit on a floor with a tolerance of less than 0.5mm per meter. If the concrete floor settles, or if the machine was never properly leveled with precision pads, the frame twists. A twisted cast iron frame is a pre-stressed bomb. Add dynamic loads, and the crack appears at the point of highest torsional stress.

Thanks in advance.

A high-volume kitchen cabinet manufacturer in North Carolina. Machine: Biesse B Solid 2.0, 5 years old. Symptom: Intermittent "X-axis following error" and a visible 4-inch crack on the right column. biesse b solid full cracked

The best repair is the one you never need. Follow this prevention protocol religiously. A Biesse B Solid must sit on a

You can specify different excess amounts for individual sides (top, bottom, left, right) by enabling the "Rectangular Blank" and "Different Excess Material for Sides" options. Add dynamic loads, and the crack appears at

#Biesse #BiesseBSolidFull #CNC #MachinistProblems #BrokenMachine

In the Biesse Works software, you can reduce axis acceleration from 100% to 85% without significantly impacting cycle time. This reduces peak dynamic loads by nearly 30%. Speak to your Biesse service agent about "soft ramping."