Cp Plus Firmware Update ((exclusive)) Today

For "Upgrade Type," select "Main System" (or "Firmware"). Do not touch "BootLoader" or "Logo" unless specifically instructed by tech support.

Congratulations, the CP Plus firmware update is complete. But you are not done yet.

You can update your device directly using its interface or via a web browser. Method 1: Using the DVR/NVR Local Interface Insert the USB cp plus firmware update

Running old firmware on your CP Plus device is a security hazard. Hackers actively scan the internet for vulnerable CCTV systems with unpatched firmware. Once compromised, your cameras could become part of a botnet, or worse, a stalker could watch your live feeds.

On a PC connected to the same network, open a web browser (Chrome or Edge works best). Type http://[DVR_IP_Address] into the address bar. For "Upgrade Type," select "Main System" (or "Firmware")

This guide is for informational purposes. Always refer to the official documentation provided by CP Plus. If you are unsure about any step, contact CP Plus technical support or a certified security system integrator.

CP Plus NVR Firmware Download (Dec 2025) - Eye Tech Securities But you are not done yet

A minute passed. Then, the CP Plus logo splashed across the monitor. One by one, the sixteen feeds flickered back to life, the motion now fluid and crisp. The stutter was gone.

Step-by-Step Guide: How to Update Your CP PLUS DVR/NVR Firmware

: Check the sticker on your DVR/NVR to find the exact model number (e.g., CP-UNR-108F1). Download the Firmware : Visit the official CP PLUS Firmware Download Page or a trusted resource like to find the update file for your specific model. Prepare a USB Drive Use a USB drive with 4GB to 32GB : The drive must be formatted to . It will not be detected if it is NTFS or exFAT. Copy the downloaded file directly to the root folder of the USB (don't put it in a subfolder). Phase 2: The Update Process