| Parameter | Min | Typ | Max | Unit | |----------------------|------|-----|------|------| | Supply voltage (VCC) | 2.4 | 3.3 | 3.6 | V | | Digital input low | -0.3 | | 0.8 | V | | Digital input high | 2.0 | | 3.6 | V | | Output high (Ioh=2mA)| 2.4 | | | V | | Output low (Iol=2mA) | | | 0.4 | V | | Operating temp | -40 | | +85 | °C |
The E07-M1101D is suitable for a wide range of applications, including:
Furthermore, the "D" in M1101D often signifies the inclusion of a or a specific antenna connector (like an IPEX or a spring antenna). Ensuring a solid antenna connection is vital; without it, the module’s impressive range—which can reach several hundred meters in open space—will be severely neutered. Conclusion e07-m1101d pinout
Below is a minimal wiring diagram for embedding E07-M1101D in a custom PCB.
⚠️ Verify with multimeter: GND is usually pin 1 (square pad on PCB). | Parameter | Min | Typ | Max
If “e07-m1101d” is a clone/module, the typical 8-pin header (2×4, 2.54mm pitch) would be:
By exploring these resources and staying up-to-date with the latest information, you'll be well-equipped to work with the E07-M1101D and create innovative projects that leverage its capabilities. ⚠️ Verify with multimeter: GND is usually pin
If you see all zeros on MISO or get no interrupt, re-check SCK, MOSI polarity, and DIO0 connection.
Enable SPI via raspi-config and install lora Python libraries.
© 2022 POKOXEMO - ⭐Muchas Gracias por tu Visita⭐