Land Rover | B1304-04

For the uninitiated, B1304-04 sounds like a random alphanumeric string. For a mechanic or a seasoned Rover enthusiast, it triggers a specific protocol: Check the ABS pump motor circuit .

: Significant physical effort required to turn the wheel.

When B1304-04 becomes active, the driver will typically observe one or more of the following symptoms: land rover b1304-04

: High resistance at EPAS-specific ground points (e.g., G1D122A or G1D132 depending on the model).

Because the motor sits near the exhaust manifold (on some V8 models) or the hot engine block, heat cycles cause: For the uninitiated, B1304-04 sounds like a random

Land Rover vehicles are heavy. They weigh between 5,500 and 6,800 lbs. The ABS pump motor is responsible for pressurizing brake fluid during stability events. Over time (typically 80,000 to 120,000 miles), the carbon brushes inside the DC electric motor wear down, or the commutator becomes corroded.

Please check with your Land Rover dealer before attempting a repair, as Land Rover has extended the recall to some Evoque models ( Powerful UK When B1304-04 becomes active, the driver will typically

Fault code in Land Rover vehicles specifically refers to a System Internal Failure within the Electronic Power Assisted Steering (EPAS) system . This code is commonly encountered on models like the Range Rover Evoque , Discovery Sport , and Range Rover Sport (typically 2012–2017). Symptoms of B1304-04 When this code is triggered, drivers typically experience:

No. There is no active recall for general ABS pump motor failure. However, check with your local dealer; some markets had extended warranties for ABS modulator failures on 2010-2013 Range Rover Sports.