Tudor 2100 Tp Manual

Do not confuse the "Tudor 2100" with the later "Tudor 2100-1" or "Tudor 21000" series (1990s), which use different movements like the ETA 2824-2.

: Use the internal jumper (JP1) to set the correct output voltage, which can typically be configured for 24V, 36V, 48V, 72V, or 80V systems. Tudor 2100 Tp Manual

: Ideal for electric forklifts, pallet jacks, and other industrial electric vehicles. Do not confuse the "Tudor 2100" with the

| Task | Frequency | Notes | |--------------------------|--------------------------|--------------------------------------------| | Manual winding | Daily | Do not over-wind; stop at full resistance | | Gasket lubrication | Every 2 years | Use silicone grease on crown & caseback | | Full movement service | Every 3–5 years | Find a vintage Tudor/Rolex specialist | | Water resistance test | Annually (if used near water) | Low pressure only (wet test avoided) | | Crystal polishing | As needed | Use polywatch for acrylic scratches | and other industrial electric vehicles.

: Use only a dry cloth to clean the exterior.