With RθJA = 110°C/W, at 1W dissipation, the junction rises 110°C above ambient. At 25°C room temp, the junction hits 135°C – safe for silicon but near the 150°C max. Do not exceed 1.3W continuous without a heatsink , or you risk both electrical failure and outgassing of the 94V-0 compound.
controller protocol, some KL SN102 modules may have non-standard pinouts for the 16-pin interface. Technical Context & Datasheets Kl Sn102 94v-0 Datasheet
| Parameter | Value | Condition | | :--- | :--- | :--- | | Flammability Class | | UL94 (thickness ≥0.8mm) | | Glow Wire Ignition Temp (GWIT) | 750°C | IEC 60695-2-13 | | Comparative Tracking Index (CTI) | 175-250V | IEC 60112 | | Hot Wire Ignition (HWI) | 30-60 sec | UL 746A | With RθJA = 110°C/W, at 1W dissipation, the
If you are trying to wire or program this component, you should look for the datasheet of the underlying controller rather than the PCB marking. Interface Protocol : Most of these modules use either a standard parallel interface (8-bit or 4-bit) or a graphic interface (like the PM8332D). Datasheet Repositories controller protocol, some KL SN102 modules may have
Typically 102 x 64 pixels or 128 x 64 pixels, depending on the specific revision (e.g., VP12864). Display Type: Monochrome TFT LCD or Graphic LCD module.