Rm1-2316 - Schematic

The schematic will show the path of the AC line current moving through a Fuse (F1) and into an EMI (Electromagnetic Interference) filter. This usually consists of line filters and sometimes a varistor (MOV) for surge protection.

Following the input, the schematic shows a Bridge Rectifier (or a 4-diode arrangement) converting AC to pulsating DC. This is immediately followed by the Main Filter Capacitor (usually a large electrolytic capacitor, e.g., 400V 100uF). Rm1-2316 Schematic

| Pin | Function | Measured Voltage (relative to GND) | |-----|------------------------|--------------------------------------| | 1 | VIN (18–36V DC) | +24V | | 2 | Enable (active high) | 0V / 5V | | 3 | Ground | 0V | | 4 | Feedback (to external divider) | 1.25V (typical reference) | | 5 | VOUT (5V or 12V) | +5V or +12V | | 6 | Compensation (RC net) | ~1V – 2V ripple | The schematic will show the path of the

What I can provide is a for creating your own report if you have access to the schematic. This will help you document it thoroughly and legally. This is immediately followed by the Main Filter