2m Flash - Use Fmuv3 Firmware //free\\ Access

// Configuration structure typedef struct adaptive_bb_s uint8_t resolution; // 0=low, 1=normal, 2=high uint8_t auto_erase; // auto-erase oldest logs uint8_t priority_mode; // 0=quality, 1=duration uint16_t max_log_seconds; uint8_t dynamic_rate; // adjust rate based on flash remaining adaptive_bb_t;

Stock firmware cannot be overwritten while the radio is on. You must force the bootloader: 2m flash - use fmuv3 firmware

if(strcmp(arg, "adaptive_bb") == 0) char *subcmd = strtok(NULL, " "); static adaptive_bb_t adaptive_bb_config =

If you only use your RT3S for UHF DMR (446 MHz / 70cm), stick with the stock firmware. It is stable and boring. .auto_erase = 1

static adaptive_bb_t adaptive_bb_config = .resolution = 1, .auto_erase = 1, .priority_mode = 0, .max_log_seconds = 180, // 3 minutes max by default .dynamic_rate = 1 ;

, as older bootloaders might incorrectly report a 1MB limit. PX4 Autopilot Are you encountering a flash overflow error while building your own firmware, or are you trying to manually update a specific board? FMUv3 issue with pixhawk 2.4.8 - PX4 Discussion Forum 16 Dec 2019 —