Firmware Upd — N301 V6.0

: Supports four essential modes: Router, Repeater, Access Point, and WISP. Technical Specifications

To ensure a successful upgrade and avoid "bricking" your router, follow these standardized steps: Download the Correct Version

System Tools > Firmware Upgrade .

– set your Wi-Fi name/password, admin password, and reboot schedule.

| Problem | Likely Cause | Solution | |--------|--------------|----------| | “Firmware file is incorrect” | Wrong hardware version file | Double-check V6.0 label on router. | | Update stuck at 50% | Corrupted download | Re-download firmware, verify file size (~3–4 MB). | | Wi-Fi slower after update | Old config conflict | Perform a factory reset and manually reconfigure. | | Can’t login after update | Cache or different default IP | Clear browser cache; try http://192.168.0.1 or 192.168.1.1. | | Router bricked | Power loss during flash | Use TFTP recovery (see above). | N301 V6.0 Firmware UPD

– default IP and credentials.

Downgrading to V5.x is after upgrading to V6.0 due to a bootloader (U-Boot) update. Technicians requiring rollback must use the serial console (TTL 3.3V, 115200 baud). : Supports four essential modes: Router, Repeater, Access

Before starting, ensure you have a physical Ethernet cable. Updating over Wi-Fi is risky as a connection drop can permanently damage (brick) the device.

Is this for a , a school assignment , or a user guide ? | Problem | Likely Cause | Solution |