Hard Reset Ruckus Wireless R320
The R320 has no standalone web interface by default on recent firmware (it becomes a controller-managed "Lite AP"). If you hard reset it and need a standalone interface for testing, you must manually flash the "Unleashed" firmware via TFTP after the hard reset.
A hard reset will wipe :
Unplug the Ethernet cable from the R320. Wait 10 seconds for the capacitors to drain. (Yes, this actually matters for a clean reset.) Hard Reset RUCKUS WIRELESS R320
The R320 will revert to its factory "Out of the Box" state: begging for a DHCP IP address and broadcasting a RuckusAP SSID with no security. The R320 has no standalone web interface by
💡 : If the AP was previously managed by a ZoneDirector or SmartZone controller, it may automatically re-download its old configuration once it reconnects to the network. To prevent this, remove the AP from the controller's inventory before resetting. To help you get back online, Wait 10 seconds for the capacitors to drain
If you manage multiple RUCKUS APs, consider documenting the MAC addresses and physical locations before performing a hard reset, as the device will disappear from your network monitoring tools until re-adopted.