Canon Maxify Mb2140 Ink Absorber Reset Jun 2026

The tool may show percentages dropping from 100% to 0%. If no change occurs, your printer isn’t fully in Service Mode.

It is technically possible to reset the counter without touching the ink pads. However, this is highly inadvisable. If you reset the counter but the pads are actually full, the printer will resume printing. Eventually, the pads will reach 100% capacity and overflow.

To understand the reset process, you first need to understand what you are resetting. canon maxify mb2140 ink absorber reset

Canon programs a maximum limit into the printer’s firmware. Once the counter reaches that preset limit, the printer assumes the pads are saturated and will leak ink onto your desk if printing continues. To prevent this potential hazard, the printer enters "Protection Mode" and displays the error code (usually ).

cleans its heads, it dumps a tiny bit of excess ink into a set of felt pads inside its chassis. The printer’s internal counter had finally decided those pads could hold no more. It was a digital "stop" command, effectively turning his expensive machine into a high-tech paperweight. "Not today," Arthur whispered. He had a deadline. The tool may show percentages dropping from 100% to 0%

Inside the Service Tool window, look for a section labeled or “Waste Ink” (interface varies by version).

The is a fantastic solution for 80% of users. It costs nothing (if you already have a Windows PC) and gets your printer working again in under 10 minutes. However, this is highly inadvisable

This is the most critical part of this article:

: Ensure the printer is plugged in but turned off.

and tapped it exactly five times. On the fifth tap, he released everything. The green light flickered, then stayed steady. The was now in a trance—Service Mode. It was vulnerable. The Software Key Arthur didn't use a physical screwdriver; he used a Service Tool