Renault Megane 1 Service Light Reset Upd -

While still holding the button , turn the ignition OFF . Wait for 3 seconds (let the lights on the dash go out). Without releasing the button, turn the ignition back ON (Position 2 again).

: Keep the button held until the flashing stops and the display shows the new service interval (e.g., 6000 miles or 10,000 km).

While holding the accelerator, in quick succession. renault megane 1 service light reset

The reset procedure differs slightly between the two. We will cover both.

If the above method does not work, you can use a scan tool to reset the service light. Here is how: While still holding the button , turn the ignition OFF

(turn the key to the second position so the dashboard lights up, but do not start the engine).

This method works for models equipped with a digital trip computer display. : Keep the button held until the flashing

(models roughly from 1995 to 2002), use the manual button on the instrument cluster. Standard Reset Procedure Turn the ignition on

Some late-model Phase 1 Meganes (circa 2001–2002) transitioned toward the interface seen in the Megane II. If the dashboard button doesn't work, try this: Turn the ignition on without starting the engine.