S-tec 55x Installation Manual Jun 2026

For detailed installation and maintenance documentation, you can refer to the Entegra Integrated Flight Display System Installation Manual or official product pages from Genesys Aerosystems . Additional resources such as the Pacific Flying Club Manual and the X-Plane S-TEC 55 Autopilot Manual

Get the manual. Follow the rigging checklist. Perform the flight test. S-tec 55x Installation Manual

: Instructions for configuring dual-mode intercepts, allowing the system to automatically transition from Heading (HDG) mode to track NAV or APR signals . Perform the flight test

This is where the "art" of the mechanic comes in. The manual dictates the exact pushrod lengths, cable tensions (if using capstan drives), and the alignment of the servo mounting brackets. It specifies the preload required. Too much preload, and the servo burns out. Too little, and you get flutter. The manual dictates the exact pushrod lengths, cable

This article is for informational purposes only. Always refer to the current, approved S-TEC 55x Installation Manual and applicable STC documentation when performing any installation. Consult with a certified A&P mechanic or avionics technician before beginning any aircraft modification.

: Fully integrates with GNS 430/530 systems and HSI for lateral steering (GPSS) and glideslope coupling. Pacific Flying Club

If you buy a used aircraft with an S-TEC 55x installed, the installation manual should be in the aircraft’s permanent maintenance records. Require it during pre-purchase.