Navigate to the EZCAD installation folder (typically C:\EZCAD2 or C:\Program Files\EZCAD ). Look for ezcad.cfg . If missing, proceed to Step 3.
Check your EZCAD directory for ezcad.cfg or markcfg7 . If these files are missing, Windows Defender may have removed them.
After the software opens, go to Config -> Parameter (Password: 123456 or 1 or ezcad2 ). You must re-enter your laser wavelength (1064nm, 355nm) and correct the "Lens" parameters (usually 160mm or 110mm). If you don't know these, look at the sticker on your laser's scanning head.
Navigate to the EZCAD installation folder (typically C:\EZCAD2 or C:\Program Files\EZCAD ). Look for ezcad.cfg . If missing, proceed to Step 3.
Check your EZCAD directory for ezcad.cfg or markcfg7 . If these files are missing, Windows Defender may have removed them. ezcad.cfg failed
After the software opens, go to Config -> Parameter (Password: 123456 or 1 or ezcad2 ). You must re-enter your laser wavelength (1064nm, 355nm) and correct the "Lens" parameters (usually 160mm or 110mm). If you don't know these, look at the sticker on your laser's scanning head. go to Config ->
