Northeast Outfitters Vacation Home 10 Tent Instructions Fixed «EXTENDED • 2024»

: Attach the corner fittings to the hip rafters in the same manner.

Attach the base plates to the leg poles and secure them with pins.

While specific manufacturing years may have slight variations, the standard assembly for the Northeast Outfitters Vacation Home 10 follows this architectural logic. northeast outfitters vacation home 10 tent instructions

Once the frame is standing, fully secure the internal straps to the frame.

into the ground at a 45-degree angle approximately four feet out from each leg. ratchet straps or guy lines : Attach the corner fittings to the hip

: Connect the corner fittings using the spreader poles, securing them with pins to complete the upper frame. Draping the Tent : Place the tent top over the assembled frame.

: Choose a level site clear of rocks and overhead power lines or dead tree limbs. Manual Access Once the frame is standing, fully secure the

to the leg fittings and pull them tight against the stakes to ensure stability in wind. cdn.prod.website-files.com Pro Tips for Success Color Coding

: If adding sidewalls, unroll them between stakes and side poles, then attach the snap hooks to the rope line on the tent top. General Maintenance Tips Northeast outfitters vacation home 10 tent instructions

Take the three long poles from the bag. These are shock-corded (elastic inside), so let them snap together segment by segment. Do not let go of a half-assembled pole—the shock cord can whip and hit you or a bystander.

With the bottom pins secured into the pole ends: