The is a high-performance, sensorless vector control frequency inverter designed for single-phase 220V power systems. Although this specific model is now discontinued and often replaced by newer series like the GD10 or GD100 , many units remain in service across industries like pump and fan control, manufacturing, and edge banding machines.
Rated IP20, suitable for indoor, dust-controlled environments. Core Features & Functionality invt che100-0r7g-s2 manual
In the world of industrial motor control, the Variable Frequency Drive (VFD) is an indispensable component. Among the many reputable manufacturers, INVT (Shenzhen INVT Electric Co., Ltd.) stands out for producing robust, high-performance drives. The is a specific model within the CHE100 series, designed for single-phase input and three-phase output to control small to medium-sized AC motors. Core Features & Functionality In the world of
| Group | Function | Example for 0.75kW Motor | | :--- | :--- | :--- | | | Basic Parameters | P0.01 (Motor rated power) = 0.75 | | P1 | Motor Parameters | P1.01 (Rated voltage) = 230V; P1.02 (Rated current) = Check motor nameplate (e.g., 4.2A) | | P2 | Start/Stop Control | P2.01 (Start mode) = 0 (Direct start) | | P3 | V/F Control | P3.01 (Torque boost) – Set low to prevent overcurrent | | P4 | Input Terminals | Configure external switches (FWD/REV) | | P5 | Output Terminals | Configure relay outputs for fault alarms | | Group | Function | Example for 0
Uses a natural cooling design, which is advantageous in environments with high concentrations of cotton or dust, as it reduces maintenance needs.
| Interval | Action | Manual Reference | | :--- | :--- | :--- | | | Check for abnormal vibration, noise, or overheating. | Section 7.1 | | Monthly | Clean the heatsink and cooling fan with compressed air. | Section 7.2 | | Quarterly | Verify all terminal screws (L1, L2, U, V, W) are tight. Loose terminals cause arcing. | Section 7.3 | | Annually | Measure input and output voltage/current. Check bus capacitor health (by measuring DC voltage). | Section 7.4 |
Includes over 25 fault protection types, covering over-current, over-voltage, and overload scenarios. Installation & Maintenance Highlights